Skip to the beginning of the images gallery

Malpassi PBV388-30 Fuel Injection Rising Rate Regulator

Product Code

PBV38830

£ 115.31

In stock

Qty

Malpassi PBV388 Rising Rate Fuel Pressure Regulator

If you replace the standard fuel pressure regulator with another adjustable model, you can easily improve performances of the standard injection system. With our Rising Rate regulator the base pressure variation with the same boost vacuum value, is not "linear" but "progressive". You can enrich as rpm increase while keeping a clean idle. It has been designed to provide a constant fuel pressure under any load (from idle to full throttle) and driving conditions, high-flow delivery and superb pressure control. Ideal for modified street cars/motorsport/racing. Fuel pressure will be stable into system even at engine off. Our regulator is manufactured in special alloy by casting, and each unit is assembled by hand and tested to assure accurate working.

For applications on aspirated a/o turbocharged engines
1:1.5 air/fuel rate
Compatible with alcohol fuel (E85)
1 x INLET male connector, direct fitting to the rail (plus two spacers 19 mm for perfect fitting)
1 x OUTLET/RETURN 8 mm tail
1 x vacuum a/o boost connector, 5 mm tail, on 6x1 mm threaded port
Base pressure adjustable from 1 to 8 bar (with proper pump)

Additional Information

More Information
Product Code	PBV38830
Manufacturer	Malpassi
Description	Malpassi PBV388 Rising Rate Fuel Pressure Regulator If you replace the standard fuel pressure regulator with another adjustable model, you can easily improve performances of the standard injection system. With our Rising Rate regulator the base pressure variation with the same boost vacuum value, is not "linear" but "progressive". You can enrich as rpm increase while keeping a clean idle. It has been designed to provide a constant fuel pressure under any load (from idle to full throttle) and driving conditions, high-flow delivery and superb pressure control. Ideal for modified street cars/motorsport/racing. Fuel pressure will be stable into system even at engine off. Our regulator is manufactured in special alloy by casting, and each unit is assembled by hand and tested to assure accurate working. For applications on aspirated a/o turbocharged engines 1:1.5 air/fuel rate Compatible with alcohol fuel (E85) 1 x INLET male connector, direct fitting to the rail (plus two spacers 19 mm for perfect fitting) 1 x OUTLET/RETURN 8 mm tail 1 x vacuum a/o boost connector, 5 mm tail, on 6x1 mm threaded port Base pressure adjustable from 1 to 8 bar (with proper pump)