If you replace the standard fuel pressure regulator with another adjustable model, you can easily improve performances of the standard injection system. With our Rising Rate regulator the base pressure variation with the same boost vacuum value, is not "linear" but "progressive". You can enrich as rpm increase while keeping a clean idle. It has been designed to provide a constant fuel pressure under any load (from idle to full throttle) and driving conditions, high-flow delivery and superb pressure control. Ideal for modified street cars/motorsport/racing. Fuel pressure will be stable into system even at engine off. Our regulator is manufactured in special alloy by casting, and each unit is assembled by hand and tested to assure accurate working
For applications on aspirated a/o turbocharged engines
1:1.5 air/fuel rate
Compatible with Alco holed fuel (E85)
2 x INLET/OUTLET male connector 14x1,5 mm
1 x RETURN 16x1,5 mm plus 8 mm tail
1 x vacuum a/o boost connector, 5 mm tail, on 6x1 mm threaded port
Base pressure adjustable from 1 to 8 bar (with proper pump)
If you replace the standard fuel pressure regulator with another adjustable model, you can easily improve performances of the standard injection system. With our Rising Rate regulator the base pressure variation with the same boost vacuum value, is not "linear" but "progressive". You can enrich as rpm increase while keeping a clean idle. It has been designed to provide a constant fuel pressure under any load (from idle to full throttle) and driving conditions, high-flow delivery and superb pressure control. Ideal for modified street cars/motorsport/racing. Fuel pressure will be stable into system even at engine off. Our regulator is manufactured in special alloy by casting, and each unit is assembled by hand and tested to assure accurate working
For applications on aspirated a/o turbocharged engines
1:1.5 air/fuel rate
Compatible with Alco holed fuel (E85)
2 x INLET/OUTLET male connector 14x1,5 mm
1 x RETURN 16x1,5 mm plus 8 mm tail
1 x vacuum a/o boost connector, 5 mm tail, on 6x1 mm threaded port
Base pressure adjustable from 1 to 8 bar (with proper pump)
